FREE Guide
Home | News | Free Guide | Contact Us | About TC
Temperature Sensors
Mineral Insulated Metal Sheathed
Thermocouple Assemblies
 
 
Home | News | Free Guide | Contact Us | About TC
TC Measurement & Control Inc
for Temperature Sensing, Measurement and Control
Tel: 708 449 0700
Toll Free: 877 244 1777

 click here for more information
INFO

General Purpose Thermocouple Sensor
type3.jpg
 click here for more information
INFO
Mineral insulated thermocouples are extremely robust temperature sensors suitable for use in arduous conditions over a wide temperature of up to 2200°F (1200°C). Sheaths can be generally be bent, twisted and flattened to suit applications without impairing performance.

 Available in thermocouple types: K, T, J, N, E, S, R, B, C and D with
  sheath diameters from 0.010" to 0.50".

 Wide choice of terminations available e.g. terminal head, connector,
  cable, temperature transmitter etc.

 Wide choice of sheath materials e.g.. stainless steel, Inconel, Pyrosil
  etc as well as more exotic materials such as Hastelloy, Platinum and
  Molybdenum.

Bayonet Thermocouple
INFO
 click here for more information

Hand Held Thermocouple Probe
 click here for more information
INFO

Heavy Duty Metal Sheathed Thermocouple
 click here for more information
INFO

 click here for more information
INFO
High Temperature Ceramic Sheathed Thermocouple

Thermocouple, Thermowell, Extension Piece and Terminal Head Assemblies
 click here for more information
INFO
Terminal Head Mounting Thermocouple Inserts and Thermocouple Transmitter Inserts
 click here for more information
INFO


Mineral Insulated Metal Sheathed
Platinum Resistance Thermometers
INFO
 click here for more information

These thermocouple sensors are suitable for general purpose applications up to a temperature of 750 °F. The sheath material on these temperature sensors is 316 stainless steel and they have a grounded junction for fast response to temperature changes.

 Available in thermocouple types: K, T, J, N and E as simplex or
  duplex units.

 Wide choice of terminations available e.g. terminal head, connector,
  cable, temperature transmitter etc.

 Suitable for general purpose temperature measurements.
These bayonet thermocouple sensors are suitable for use in plastics machinery and general purpose applications with an industry standard single slot bayonet fitting. The fitting can be fine tuned for positioning on site, the sensor can also be bent to fit unusual angles.

 Available in thermocouple types: K, T, J, N and E.

 Rated to 1470 °F.

 Stainless steel armoured leads available.
Hand held thermocouple probes are available in range of tip styles to suit a wide range of applications and temperature ranges. They are supplied with a nylon handle, coiled extension lead and are generally terminated in a miniature plug for compatability with instrumentation.

 Available in thermocouple types: K, T, J, N and E.

 Wide choice of tip configuration e.g. chisel (shown), penetration
  (pointed), perforated (for air temperature measurements), spring
  loaded (for surface temperature) etc.

 Wide choice of sheath diameters and lengths available.

 Rigid or flexible (mineral insulated) sheaths.
These heavy duty thermocouples are specifically designed for temperature sensing in arduous industrial environments such as blast or carburizing furnaces, kilns, large ovens and galvanising baths where their robust construction ensures a prolonged sensor life.

 Available in thermocouple types: K, T, J, N, E, S, R, B, C and D.

 Thick wall protective sheaths in stainless steel, Inconel 600, Incoloy
  800, Chromium Iron or Nicrobell.

 Suitable for temperatures up to 2280°F.

 Depending on sheath type selected, these thermocouples are
  suitable
for use in neutral, reducing or oxidizing atmospheres and
  those with
high concentrations of sulphurous gases.
These thermocouple assemblies incorporate a ceramic sheath and are suited for high temperature measurements up to 2900°F or higher in applications such as in kilns, furnaces or flues and can be manufactured to any length required.

 Available in thermocouple types: K, T, J, N, E, S, R, B, C and D as
  simplex or duplex units.

 Primary and secondary ceramic protective sheaths are available in a
  range of diameters of; impervious aluminous porcelain, impervious
  recrystallised alumina, impervious mullite and silicon carbide.

 Suitable for temperatures up to 2900°F or higher.

 Wide range of attachment fittings available.
Custom made thermowells to suit any application are available with a wide choice of attachment mechanisms (flange, screw connection etc) and can be with integral thermocouple sensors, extension pieces and terminal heads.

 Available in thermocouple types: K, T, J, N, E, S, R, B, C and D as
  simplex or duplex units.

 Wide range of thermowell diameters, lengths and configurations.

 Custom built to your exact requirements.

 Wide range of attachment fittings available.

 Wide operating temperature ranges.
These thermocouple inserts form part of many thermocouple and thermowell configurations. The assembly can be fitted with either a terminal block or a temperature transmitter both of which can be spring loaded and will fit in to a DIN terminal head.

 Available in thermocouple types: K, T, J, N, E, S, R, B, C and D as
  simplex or duplex units.

 Spring loaded 0.125", 0.188", 0.250" and 0.313" inserts.

 Terminal block or temperature transmitter termination.

 1.30" fixings to suit any standard terminal head.

 Wide operating temperature ranges.
Mineral insulated resistance thermometers (RTD’s) are robust temperature sensors suitable for use in arduous conditions over the temperature range: -60°F to +660°F. Sheaths can be generally be bent and twisted to suit applications without impairing performance.

 Available in 2,3 and 4-wire configurations with simplex, duplex and
  triplex elements.

 Sheath diameters from 0.08" to 0.50".

 Wide choice of sheath materials e.g. stainless steel, Inconel, Incoloy,
  Platinum etc.

 Higher temperature versions available.
General Purpose Platinum Resistance Thermometers
type3r.jpg
 click here for more information
INFO

These platinum resistance thermometer sensors are suitable for general purpose applications and can also be manufactured for high accuracy applications. The sheath material on these temperature sensors is 316 stainless steel .

 Available with IEC 751 Class B, Class A as well as 1/3 DIN, 1/5 DIN
  and high accuracy 1/10 DIN elements.

 UKAS calibration available.

 Suitable for general purpose and high accuracy temperature
  measurements.
Platinum Resistance Thermometer, Thermowell, Extension Piece and Terminal Head Assemblies
 click here for more information
INFO
Custom made thermowells to suit any application are available with a wide choice of attachment mechanisms (flange, screw connection etc) and can be with integral platinum resistance thermometer sensors, extension pieces and terminal heads.

 Available in 2, 3 and 4-wire simplex or duplex configurations.

 Wide range of thermowell diameters, lengths and configurations.

 Custom built to your exact requirements.

 Wide range of attachment fittings available.

 Wide operating temperature ranges.

Terminal Head Mounting Platinum Resistance Thermometer Inserts
 click here for more information
INFO
These resistance thermometer inserts form part of many resistance thermometer (RTD) and thermowell configurations. The assembly can be fitted with either a terminal block or a temperature transmitter both of which can be spring loaded and will fit in to a DIN terminal head.

 Available in 2, 3 and 4-wire simplex or duplex configurations.

 Spring loaded 0.125", 0.188", 0.250" and 0.313" inserts.

 Terminal block or temperature transmitter termination.

 1.30" fixings to suit any DIN terminal head.

 Wide operating temperature ranges.